Future-2005 Product Information


The Future 2005 is based on an electromagnetic pulse method which can be used to select anomalies in the target area. Thus the device is able to detect different structures and natural features of the ground like for example:

mark   metal canisters, tanks, boxes
mark   voids, grave chambers, caves and tombs
mark   steelpipes and water conduits

The Future 2005 is a professional measuring instrument with a very high resolution antenna of 100cm width. Compared to the  Rover devices with its testers and coil probes, the Future 2005 offers a 8x higher density of measured data. Compared to the  Earth Imager with its 8x lower resolution the device is most suitable for the professional archeological use. This fact is reflected also in the grafical representation inside the  3D-Software. Detailed graphics are the basis for an exact determination of the size and depth of objects. Because of the extented antenna the device is most suitable in large and even fields. Besides the usual graphical representation the device provides two more particularities. On the one hand it makes buried object immediately visible with the horizontal live picture and on the other hand a typified ultrasound scan can be created with the vertical antenna.

The device includes the following functionality:

mark   accoustical magnetometer
mark   high resolution ground scans in 3D
mark   live picture with horizontal ground scan antenna
mark   live picture with vertical pin pointing antenna
mark   graphical analysis on a computer

 
Future Series - Future 2005: Steel pipes, water conduits, metal objects, voids
Wireless data transmission via bluetooth
Wireless data transmission
via bluetooth

Compliance with the CE policies
Compliance with the CE policies

Depth measurement up to 18m *
Depth measurement up to 18m *

Because of the integrated microprocessor technology ground balance, depth measurement and data storage will be performed automatically by the device. The evaluation of the measured data takes place at the computer where the scanned area can be analyzed in a three-dimensional graphic with the help of the  3D-Software.

In the following table you can see the complete delivery contents and all optional accessories.
The used symbols have the following signification:

x times includedx   = x times included   not included   = not included   optional available, only for additional charge   = optional available, only for additional charge

Description  
3D software ( standard ) Yes1
Carrying case Yes1
Control unit Yes1
External power supply with charger and cable ( 12V ) Yes1
Headphones Yes1
Horizontal probe with 8 sensors Yes1
Telescopic rod assembly Yes1
Ultrasound probe with 8 sensors ( 3m ) Yes1
USB bluetooth dongle Yes1
User's manual Yes1
3D software ( "Visualizer 3D" ) Optional


All pictures are copyrighted by OKM Ortungstechnik GmbH